Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
A related question is a question created from another question. When the related question is created, it will be automatically linked to the original question.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
1. I would recommend removing C28 and C32 for stability reasons (pg. 15 of datasheet).
2. I would recommend placing the RC filter as close and possible to the ADC input.
What accuracy are you looking for and for what operating range?
LMT70+ADC system cost may be comparable to a digital temperature sensor like TMP116/TMP117/TMP112
