Hello,
Can you provide these to me?
1. SW for controlling the DUT to send CW signal (for antenna pattern measurement)
2. SW for controlling DUT to send through different antenna (for TX power measurement of different channels)
3. SW for controlling the TX power Amplifier (for TX Amp isolation measurement)
4. SW for controlling the DUT to send Chirps (for FM demodulation and bandwidth measurement)
5. SW for controlling operating frequency range of the DUT (for bandwidth measurement)
6. SW for controlling Chirp parameters (for FM demodulation measurement)
7. SW for reading out RX Gain and SNR if possible at all
8. SW for reading out detected targets (for target simulation)
Thank you !
