IWR1443BOOST: What debug information from C13 and c14

feng tang

Part Number: IWR1443BOOST
Other Parts Discussed in Thread: IWR1443

What are the debug information that we can get from IWR1443 C13 (AR_Vsense) and C14 (AR_ANAMUX)? Can we remove P1 connector, and leave pin C13 and pin C14 open?

Thanks,

Feng

over 7 years ago

0 Radio-Joe over 7 years ago

TI__Mastermind 37500 points

Hello, the AR_Vsense, AR_Anamux, and AR_ANATEST# - are auxiliary ADC input ports. You can connect them to GND if unused.
In the driver section of the mmwave_SDK there is example code to read these input ports (check datasheet for range).
Regards
Joe Quintal

0 feng tang over 7 years ago in reply to Radio-Joe

Genius 3595 points

Thanks Joe!

Sensors

Sensors forum

IWR1443BOOST: What debug information from C13 and c14