MMWAVE-STUDIO: DCA1000 with IWR1443 using mmWave studio GUI

Mitsuharu Iwasaki7

Part Number: MMWAVE-STUDIO

Hello all,

We did "Controlling mmWaveStudio from Matlab" on page 51 of mmWave Studio GUI User's Guide.

But Error masseage is showed ErrStatus=10061. Should we connect Board control, SPI connect or others in mmWave Studio GUI connectio TAB?

Please give us comments.

Best Regards.,

Mitsuharu Iwasaki

over 6 years ago

0 Michelle Liu over 6 years ago

TI__Genius 11405 points

Hi Misuharu,

I believe you still need to press Setup (1) and Connection (2). You can use Matlab code to call Lua script but that does not cover the first two steps.

In addition, make sure you see the following e2e tickets to update file to avoid error:
e2e.ti.com/.../710412 which leads to
e2e.ti.com/.../711540 (solution)

Thanks and Regards,
Michelle

Sensors

Sensors forum

MMWAVE-STUDIO: DCA1000 with IWR1443 using mmWave studio GUI