• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 30 subscribers
  • Views 524 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1642：Raw data of Tx/Rx Signal

Takuma Akimoto
Intellectual 640 points
Part Number: AWR1642
Other Parts Discussed in Thread: DCA1000EVM

Hi,

My customer is trying to obtain raw data with AWR 1642.
They would like to get Tx/Rx signal data and ADC data.
I know that ADC data can capture with DCA1000EVM and mmWave studio GUI.
However, I do not know how to capture the raw data of the Tx / Rx signal.
In order to capture this data, I think that raw data for each antenna should be acquired.
Would you tell me the way to realize it?

Best Regards,


Takuma

  • 0
    TI__Guru 58035 points
    Hello Takuma,
    The Rx data is same as the ADC data , it corresponds to the signal at each of the RX channels.
    I am not sure what you mean by TX data, could you clarify? The TX signal can be monitored at the PA output directly.

    Regards,
    Vivek
  • 0 in reply to Vivek Dham
    Intellectual 640 points
    Hi, Vivek

    I could understand the question of Rx data. I will tell customers to use DCA 1000 and mmWaveStudio.
    My customer merely said that he wanted to see the transmission signal.
    So I will ask what kind of data my customer wants and tell it to you.

    Best Regards,
    Takuma