AWR1642BOOST-ODS: Version of the Chip, ES1 or ES2

Alastair Yu

Prodigy 80 points

Part Number: AWR1642BOOST-ODS

Hi All,

I was just wondering which version of the chip the AWR1642BOOST-ODS board used, es1 or es2?

Regards

-Alastair Yu

over 6 years ago

0 Kyle Cousino over 6 years ago

TI__Mastermind 24955 points

Alastair,

To determine which version of silicon is used on your specific board, you will need to look at the device markings on your board. Specifically, look at the bottom line on the the chip. If it only says "502", then it is ES 1.0. If the bottom line says "502AC", then it is ES 2.0.

Regards,
Kyle

0 Alastair Yu over 6 years ago in reply to Kyle Cousino

Prodigy 80 points

I don't currently have one of these EVMs, the picture doesn't say and the BOM doesn't include that information either, I did a search on the datasheet and it also doesn't include this information.

Regards,
-Alastair Yu

0 Kyle Cousino over 6 years ago in reply to Alastair Yu

TI__Mastermind 24955 points

Alastair,

If you placed this order recently, then it is most likely an ES 2.0 silicon device. But you can refer to my previous post to confirm this information when you receive your device.

Regards,
Kyle

0 Alastair Yu over 6 years ago in reply to Kyle Cousino

Prodigy 80 points

Thanks Kyle!

Sensors

Sensors forum

AWR1642BOOST-ODS: Version of the Chip, ES1 or ES2