AWR1642BOOST: Raw data capture by DCA1000EVM

Sheeraz Ahmed

Part Number: AWR1642BOOST
Other Parts Discussed in Thread: IWR1642, DCA1000EVM, IWR1443

Good day,

We are currently working for capture the raw ADC data using IWR1443/IWR1642 EVMs for a university project. We found that using the radar EVMs only, we can just record 1 frame of the data. We are now planning to purchase a DCA1000EVM but it might take a while to get the card. We are wondering if anyone can give us a sample data captured by DCA1000EVM for a given scenario , we can try to process it in matlab for our required data processing results to save us sometime writing the script before we can actually get this card. Thank you.

Regards,

Sheeraz

over 6 years ago

0 Kyle Cousino over 6 years ago

TI__Mastermind 24955 points

Sheeraz,

Unfortunately, our apps teams cannot allocate bandwidth for this kind of request. Additionally, this type of request would not be appropriate for this forum. If you have specific questions about the DCA1000, you are more then welcome to post these questions on this forum.

Regards,
Kyle

0 Sheeraz Ahmed over 6 years ago in reply to Kyle Cousino

Intellectual 430 points

I see. Anyways, if we could get something as captured by the card, we might be able to read it on our own just to get started with our data processing chain. Now, we still need to wait for acquiring the card which is delayed a bit and certainly adds more time loss.

Regards,
Sheeraz

0 Kyle Cousino over 6 years ago in reply to Sheeraz Ahmed

TI__Mastermind 24955 points

Sheeraz,

Since all of the issues from this post have been addressed, this thread will be considered closed now. When you do obtain your DCA1000, please create a new thread for any questions you may have.

Regards,
Kyle

Sensors

Sensors forum

AWR1642BOOST: Raw data capture by DCA1000EVM