CCS/IWR1443BOOST: how to use IWR1433 and DCA1000EVM to caputre the raw ADC data continuously？

user5835032

Part Number: IWR1443BOOST
Other Parts Discussed in Thread: IWR1443

Tool/software: Code Composer Studio

I have run the capture demo of IWR1443 to capture the ADC data by using IWR1443 alone. because the data is only 1 frame，so we buy the DCA1000EVM . and I want to know， with this DAC1000EVM，how to capture the raw data continuously？ if there is some documents which can guide the capture process with DAC1000EVM step and step，and which new Demo can be used， please help me. thanks！

over 6 years ago

0 user5835032 over 6 years ago

Prodigy 70 points

Supplementary explain my question:
I have look the document of DAC1000EVM quick start guide， but actually we want to do is when the data are captured, we analysis and process the data ourselves，so we need export and save the captured data( timestamp is needed to be attached ）

0 Kyle Cousino over 6 years ago in reply to user5835032

TI__Mastermind 24955 points

mmWave Studio includes a script to execute a basic capture of a few frames of data and then some basic analysis. This script can be easily modified to capture a larger amount of frames. mmWave Studio can be downloaded here: www.ti.com/.../MMWAVE-STUDIO

Regards,
Kyle

0 user5835032 over 6 years ago in reply to Kyle Cousino

Prodigy 70 points

hi，Kyle
your answer make me confused, it seems too simple, I have look up the document and still do not know how to modify. Can you elaborate on it？

0 Kyle Cousino over 6 years ago in reply to user5835032

TI__Mastermind 24955 points

You can modify the DataCaptureDemo_xWR.lua script in mmWave Studio using the Lua Debugger. You can also modify it using any test editor like Notepad++.

Regards,
Kyle

Sensors

Sensors forum

CCS/IWR1443BOOST: how to use IWR1433 and DCA1000EVM to caputre the raw ADC data continuously？