TMP112: Any other part recommendation with lower shutdown current ?

Thomas LE BIVIC

Intellectual 510 points

Part Number: TMP112
Other Parts Discussed in Thread: HDC2010, , TMP117, TMP116

Hello,

I'm using HDC2010 as temp and humidity sensor but now, I'd like to switch to temp-only sensor.

I didn't find in your portfolio equivalent performances as temp sensor (accuracy/shutdown current/ mainly).

Any recommendation better than TMP112 ?

Thanks,

over 6 years ago

0 Amit Ashara over 6 years ago

TI__Guru**** 244400 points

Hello Thomas

TMP117 is a newer part of the product family with best in class accuracy and 300 nA shutdown current.

0 Thomas LE BIVIC over 6 years ago in reply to Amit Ashara

Intellectual 510 points

Thank your for sugestion,

Still doesn't get the difference with HDC2010 (0.2°, 50nA shutdown, less than 1ms conversion time + humidity for 1$) vs TMP117 (0.1°, 150nA shutdown, 15ms conversion time for 1.85$) ? The current consumption while converting is a higher (0.6mA vs 0.2) but that's totaly fine for me.
I would love a non-opened HDC2010 (with no humidity sensor of course)

0 Ren Schackmann over 6 years ago in reply to Thomas LE BIVIC

TI__Mastermind 43815 points

TMP116 is from the same family as TMP117, but has 0.2C accuracy. Even though the accuracy spec is similar, you may notice lower noise in the TMP116/7 than in HDC2010 due to differences in architecture. Additionally, HDC2010 is a DSBGA device which has the lowest possible packaging costs.

Thanks,
Ren

Sensors

Sensors forum

TMP112: Any other part recommendation with lower shutdown current ?