AWR1243BOOST: How to flash

mmUser

Prodigy 145 points

Part Number: AWR1243BOOST

Where can I find instructions for flashing the tm4c1294 microcontroller on the AWR1243BOOST board?

Note: we're asking about the tm4c1294 microcontroller firmware, NOT radarss.bin or masterss.bin.

Also, is the current tm4c1294 source code available for the AWR1243BOOST?

Thank you,

mmUser

over 6 years ago

0 Vivek Dham over 6 years ago

TI__Guru 58035 points

Hello mmUser,
The XDS110 (Using tm4c1294 IC) latest firmware can be got by installing the emulation package (EMU pack, processors.wiki.ti.com/.../XDS_Emulation_Software_Package). This has the XDSDFU.exe utility as well as the firmware.bin and bootloaderbin files that are needed.

If you have a new IC soldered on a board then you will have to update the bootloader and then the firmware. You can refer to the following app note www.ti.com/.../sprui94.pdf -> section 3.7.3.2 Firmware Maintenance Utility - xdsdfu for the details on how to update the bootloader and FW.

Regards,
Vivek

0 mmUser over 6 years ago in reply to Vivek Dham

Prodigy 145 points

Thank you.

Sensors

Sensors forum

AWR1243BOOST: How to flash