HK-1100C pressure sensor to measure height of water in tank

Moaz Adnan

i would like to use the hk-1100c to measure the height of water in a sealed overhead water tank (plastic lid screwed on, available in most households).

i have uploaded the picture pointing out the location of the sensor. is it possible ?

over 6 years ago

0 Clancy Soehren over 6 years ago

TI__Mastermind 23810 points

Moaz,

Can you link to the product page you are referring to?

0 Moaz Adnan over 6 years ago in reply to Clancy Soehren

Prodigy 30 points

This is the link to the pressure sensor . I am trying to make a water level controller for the overhead water tanks installed in most of the houses here . My aim is to measure the water level using the pressure sensor . The tanks range from 1.5m to 2 m , and I require a resolution of atleast 1mm .

0 Clancy Soehren over 6 years ago in reply to Moaz Adnan

TI__Mastermind 23810 points

Moaz,

Unfortunately, we can't help with this. We can answer questions about TI specific devices, but this is outside the scope of what we can do.

Sensors

Sensors forum

HK-1100C pressure sensor to measure height of water in tank