IWR1443BOOST: Easiest way to send data wirelessly from IWR1444

Karthik Thothathri

Part Number: IWR1443BOOST
Other Parts Discussed in Thread: CC3200, , IWR1443, CC1350

Hi,

Our application requires sending data from IWR1443 wirelessly to a tablet/PC. I was thinking of connecting the IWR1443BOOST to CC3200 LaunchXL for fast prototyping. Is my approach feasible ?

Thanks and best regards ,

Karthik

over 6 years ago

0 Jitendra Gupta over 6 years ago

TI__Guru 69960 points

Hi Karthik,
This approach is very well feasible. Here you can connect UART lines from IWR1443BOOST to CCS3200 LaunchXL. If you are planning to stack both even with each other UART Tx/Rx lines may not match, please refer EVM scheamtic of both of boards for more info. You may need to do some ECO on the boards.

Regards,
Jitendra

0 Karthik Thothathri over 6 years ago in reply to Jitendra Gupta

Prodigy 90 points

Hi Jitendra,

Thanks for the answer. Can the UART data be streamed to CC1350 (BLE) launchpad as well?

Thanks and best regards,

Karthik

0 Alex Rivera over 6 years ago in reply to Karthik Thothathri

TI__Intellectual 2885 points

Karthik,

I looked briefly at the EVM board and it looks like the pins might not align, other than that i don't see why the CC1350 would not work.

Alex

Sensors

Sensors forum

IWR1443BOOST: Easiest way to send data wirelessly from IWR1444