• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 232 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1642BOOST: How to get the FMCW signal using this senor.

Yudi Dong
Prodigy 40 points
Part Number: AWR1642BOOST
Other Parts Discussed in Thread: AWR1642

Hi,

I want to get the FMCW signal using AWR1642, but I don't know how to do it. Is there any guide or demo for consulting?

Thanks,

Yudi

  • 0
    TI__Mastermind 24955 points
    Yudi,

    There is not a specific guide or demo for this since completing this task is targeted during the characterization process of the device. Actually looking about the FMCW output from the TX antennas requires a setup of using waveguides, a downsampler, a signal generator that feeds into the downsampler, and an oscilloscope that will actually measure the downsampled signal.

    Regards,
    Kyle