LDC1612EVM: Communication protocol for LDC1612EVM

Sami Lakka76

Part Number: LDC1612EVM
Other Parts Discussed in Thread: LDC1612

Hi,

We need to integrate LDC1612EVM measurement to LabView application. Is there any documentation regarding the protocol that EVM uses?

over 6 years ago

0 Clancy Soehren over 6 years ago

TI__Mastermind 23810 points

Sami,

Unfortunately, we can no longer support LabVIEW sample code for these devices. The EVM is designed such that you can break off the LDC1612 portion and connect it manually to your own controller (such as a Launchpad, or whatever else you are comfortable using).

-Clancy

0 Sami Lakka76 over 6 years ago in reply to Clancy Soehren

Prodigy 220 points

Hi Clancy,

Just to check, there is no COM protocol for the EVM which we could use? I remember seeing some documents and Python code regarding this.

We are doing a demo for a customer and it is quite an effort to integrate the LDC to Launchpad and write an USB/COM protocol to access the measurement results.

0 Clancy Soehren over 6 years ago in reply to Sami Lakka76

TI__Mastermind 23810 points

Sami,

There is nothing like that available right now. Note that for most demos, you should be able to use the Sensing Solutions GUI data streaming page.

Sensors

Sensors forum

LDC1612EVM: Communication protocol for LDC1612EVM