• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 265 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR1443: How to set the measured width and deepth range in the config file

c.c. chen
Prodigy 60 points
Part Number: IWR1443

(1) As title mentioned, I want to use IWR1443 as object width measurement  around 0.5m~2m. How to set the config file for that.

(2) Could you suggest me what demo cases I can use for width measuring?

  • 0
    TI__Guru 50240 points
    Hi user,

    1. You'll need to set your chirp parameters in order to optimize for a certain range configuration. You can see more about this in the mmWave Sensing Estimator, available here: dev.ti.com/.../

    2. Width measurement will likely be a challenging task since radar tends to have a relatively poor angular resolution. I'd recommend evaluating your scene with the out of box demo and also the Zone Occupancy demo (both available on the TI Resource Explorer).


    Cheers,
    Akash