TDC1000-TDC7200EVM: TDC1000-TDC7200EVM LabVIEW

Luis Beltrán

Prodigy 60 points

Part Number: TDC1000-TDC7200EVM

How I could to communicate my TDC1000-TDC7200EVM with Lavbiew???

Thank you

over 6 years ago

0 Bharat Aravamudhan over 6 years ago

TI__Genius 11015 points

Luis,

You can download the LabView based GUI available for TDC1000-TDC7200EVM from ti.com, install it and run it.

0 Luis Beltrán over 6 years ago in reply to Bharat Aravamudhan

Prodigy 60 points

Bharat:

Sorry, I think that my questions need more details.

My objective is create a particular application with this board. Not use the GUI.

I would like to know how communicate the board with labview and maybe some code or example that can help me.

Thank you

Luis

0 Bharat Aravamudhan over 6 years ago

TI__Genius 11015 points

Luis,

The the LabView based GUI that you could download from the ti.com for the TDC1000-TDC7200 EVM can help you with communicating with the board for your evaluation purposes.
The SW/GUI also has some codes that helps the GUI to communicate with the EVM. You could modify those codes for your own setup.
However the GUI itself will let you setup the EVM for various setups that the devices can be configured for.

Sensors

Sensors forum

TDC1000-TDC7200EVM: TDC1000-TDC7200EVM LabVIEW