RTOS/IWR1443BOOST: IWR1443 : How to use IWR1443 EVM

Cha Myeong Hun

Part Number: IWR1443BOOST
Other Parts Discussed in Thread: IWR1443, , MMWAVE-SDK

Tool/software: TI-RTOS

To use IWR1443, use Unifflash and then the mmWave Demo visualizer. I wonder if the above method is correct.

And where can I download two xwr12xx_xwr14xx_radarss.bin, xwr14xx_mss.bin?

Thank you.

over 6 years ago

0 Akash Gondalia over 6 years ago

TI__Guru 50240 points

If you have IWR1443BOOST ES3.0 then you need mmWave-SDK 2.1. If you have IWR1443BOOST ES2.0 then you'll need mmWave-SDK 1.2 which is available here: software-dl.ti.com/.../index_FDS.html

I'd recommend following the instructions in the Setup Guide:

dev.ti.com/.../

Cheers,
Akash

Sensors

Sensors forum

RTOS/IWR1443BOOST: IWR1443 : How to use IWR1443 EVM