• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 335 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1642: could the AWR1642 radar sensor automatic start after power on by programing the configure file and control commands to flash memory?

Xia
Prodigy 60 points
Part Number: AWR1642

  • 0
    Prodigy 60 points
    We want to realize the communication between the AWR1642 mmwave radar sensor and an android phone, and we have considered two scheme as follows:
    1. control the radar sensor and receive the processed data from DSP of AWR1642 on android platform;
    2. programing the configure file and control commands to flash memory of AWR1642, and the radar sensor can start automatically once the sensor is powered on, then just need to transmit the processed data from DSP to android platform.
    Are these feasible?
    Could anyone give some suggestions?
    Thank you!
  • 0 in reply to Xia
    TI__Mastermind 24955 points

    Xia,

    How are you planning to connect the AWR1642 to the android phone? What is the connection interface between these two devices?

    Regards,
    Kyle

  • 0 in reply to Kyle Cousino
    TI__Mastermind 24955 points
    Xia,

    Do you have any update on my follow-up questions?

    Please keep in the mind that the only communication protocols between the host and AWR1642 are serial connections like UART and SPI. The CAN protocol is also an option. For communication from the AWR1642 to the host, the options are serial like UART or a high speed LVDS connection. No wireless protocols are currently implemented on the AWR1642.

    Regards,
    Kyle