CCS/IWR1642: IWR1642

Chaitra C

Prodigy 70 points

Part Number: IWR1642
Other Parts Discussed in Thread: IWR1443,

Tool/software: Code Composer Studio

Hello

I want to send the ADC data through LVDS interface.

I tried running mmwave demo code in SDK by following userguide it was successful. But it is based on CLI.

Can anyone suggest how to acheive this without CLI .

Thanks,

Chaitra

over 6 years ago

0 Cesar over 6 years ago

TI__Guru*** 148804 points

what do you mean without CLI?

Thank you
Cesar

0 Chaitra C over 6 years ago in reply to Cesar

Prodigy 70 points

Without using commandline interface for configuring the parameters like chirpcfg, profilecfg, adccfg and all.

By hardcoding this values in program.

Thanks

Chaitra

0 JohnH over 6 years ago in reply to Chaitra C

TI__Mastermind 21295 points

Hello Chaitra,

Please see the following post for instructions on hard-coding the CLI configuration. Please make sure to to replace the IWR1443 config in the provided example in the referenced thread with the config you are using for IWR1642.
e2e.ti.com/.../2616079

Regards,
John

Sensors

Sensors forum

CCS/IWR1642: IWR1642