• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 384 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1642: "coefficient tuning for Vehicle occupancy detection"

Vikas Dubey
Intellectual 390 points
Part Number: AWR1642

Hi,

In order to do coefficient tunning for Vehicle occupancy detection(V.O.D.) I have followed the steps given in "ODdemo_usersguide.pdf" .

I am facing following issue.

- When I run build_data.exe I am getting error "read_dataFile (line 263)
car2_l0r0.mat does not exist."


- I resolved above issue by renaming my training data from "test_datal0r0.mat" to "car2_l0r0.mat" and generated "data_winLen=12.mat" file.


- Please suggest how do I use "data_winLen=12.mat" file to generate coefficients.


Best Regards
Vikas

  • 0
    TI__Guru 69960 points
    Hi Vikas,
    Make sure you have created and copied data_list.txt and zone_def.cfg at the same directory where build_data.exe is present.
    This text file will contain the name of *.mat file and zone detail. Please follow the instruction given in user guide (page 13/14).


    Regards,
    Jitendra