• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 277 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

1642AWRBOOST

AWR1642BOOST

sandeep sharma
Intellectual 390 points
Other Parts Discussed in Thread: AWR1642

In the AWR1642 GUI the chest displacement y-axis is showing reading in negative values.Please explain this chest displacement graph.

  • 0
    TI__Guru 69960 points
    Chest displacement graph shows phase difference at every frame count, so it can be +/-ve value.
    All the values from dss is being set and send from VitalSigns_Output (dss_data_path.c) which is further sent out from MmwDemo_dssSendProcessOutputToMSS (dss_main.c) and on GUI recieved & parsed/processed in processData function (mainwindow.cpp).

    I would request you to go over the source code of application and GUI to map the flow of the execution and plotting.

    Regards,
    Jitendra