DCA1000EVM: IWR1443+DCA1000, question on DCA data

Shirley

Part Number: DCA1000EVM
Other Parts Discussed in Thread: IWR1443, , MMWAVE-STUDIO

I am using MMWAVE-STUDIO and DCA1000EVM to capture the data from IWR1443, and I got a default file named"adc_data.bin".But how can I get a larger data file?

over 6 years ago

0 Shirley over 6 years ago

Prodigy 110 points

the size of the default file is 4096kB.

0 Jitendra Gupta over 6 years ago in reply to Shirley

TI__Guru 69960 points

With DCA1000EVM there is no limitation of file size, it'll capture the data based on no. of frames device is configured. Try to configure for longer duration worth of frame count.

Regards,
Jitendra

0 Shirley over 6 years ago in reply to Jitendra Gupta

Prodigy 110 points

How can we configure longer duration worth of frame count?

0 Jitendra Gupta over 6 years ago in reply to Shirley

TI__Guru 69960 points

Hi,
Increase the no. of frames value in frameConfig which is under SensorConfig TAB of mmWave-Studio GUI.
Increasing the no. of frame effectively increase raw data duration from the device and finally on DCA1000 you will have bigger file size captured.

Regards,
Jitendra

0 Shirley over 6 years ago in reply to Jitendra Gupta

Prodigy 110 points

Thank you.

Sensors

Sensors forum

DCA1000EVM: IWR1443+DCA1000, question on DCA data