AWR1642BOOST: AWR1642BOOST

sandeep sharma

Part Number: AWR1642BOOST

Request to please clarify which parameter to be used out of rangebinIndex, rangeBinindexPhase or maVal to extract range data of the object from the attached uart .Also request to provide the detected object descriptor. format.

over 6 years ago

0 Anand Gadiyar over 6 years ago

TI__Genius 15005 points

Hi Sandeep,

Are you using the out of box demo? Or are you using the vital signs demo?

The structures might be different in either case.

If you're using the out of box demo, please go through the documentation for it available at the following location after installation
C:\ti\mmwave_sdk_02_00_00_04\packages\ti\demo\xwr16xx\mmw\docs\doxygen\html\index.html

It explains each parameter already.

Best Regards,
Anand

0 sandeep sharma over 6 years ago in reply to Anand Gadiyar

Intellectual 390 points

We are using the Vital Signs Demo.

0 Anand Gadiyar over 6 years ago in reply to sandeep sharma

TI__Genius 15005 points

Hi Sandeep,

I'm closing this as we just answered in the other thread:
e2e.ti.com/.../2795283

Best Regards,
Anand

Sensors

Sensors forum

AWR1642BOOST: AWR1642BOOST