• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 274 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1642BOOST: capture data from J6 connector - pin 5 and pin 7

Arun Dasari
Intellectual 310 points
Part Number: AWR1642BOOST

Hello Team,

I am trying to collect serial data from J6-connector pin 5(Tx from AWR device) and pin-7 (Rx into AWR device). I am using USB to TTL converter to capture serial data from pin-5 and pin-7. Nothing is seen on serial Putty terminal(baud rate set to 115200).

How to capture the data from these pins?

Thanks,

Arun