AMC6821: initialized process

user4979999

Prodigy 690 points

Part Number: AMC6821

Hi,

Customer has question below, please check, thanks.

Should we have to do initialized process in core-boot for AMC6821SDBQR?

over 5 years ago

0 Ren Schackmann over 5 years ago

TI__Mastermind 39845 points

Lynn,

Your customer will have to decide if they need to change the default settings for their use case.

Thanks,
Ren

0 eddy lu over 5 years ago in reply to Ren Schackmann

Prodigy 10 points

Ren,

Except customization, are there any standard initialization process need to be done for this chip by software or the chip can do itself. If the chip need to do software initial process, can TI provide reference initial code?

thx && br

0 Ren Schackmann over 5 years ago in reply to eddy lu

TI__Mastermind 39845 points

Hi eddy,

The AMC6821 starts up and operates at the default settings shown in the datasheet. If you need the device to operate differently, you will need to configure it.

Thanks,
Ren

Sensors

Sensors forum

AMC6821: initialized process