AWR1642BOOST: Eval boards for receiving CAN data on MCAN

Shraavan nnv

Intellectual 280 points

Part Number: AWR1642BOOST
Other Parts Discussed in Thread: AWR1642

We are using AWR1642 for sending object data (classic frame format )on MCAN.

Could you suggest any TI eval boards that can receive the data from AWR1642 board .

over 6 years ago

0 Cesar over 6 years ago

TI__Guru*** 148804 points

Hi,

Any board that has a CAN receiver would work. You could use a AWR1642 or a TDA based board if available

Thank you
Cesar

0 Shraavan nnv over 6 years ago in reply to Cesar

Intellectual 280 points

We just need to receive the frame data for a small application, since AWR 1642 is costly. Can you recommend any TI eval board that can receive frame data.

0 Raghunandan Kamath over 6 years ago in reply to Shraavan nnv

TI__Mastermind 22155 points

Hello Shraavan,
There are off the shelf CAN dongles that are available which you can purchase . There are ValueCan3, PCAN-USBFD etc that you can connect to the device and then receive the frame from the device.

Thanks,
Raghu

0 Shraavan nnv over 6 years ago in reply to Raghunandan Kamath

Intellectual 280 points

Thank you, this information is useful.

Sensors

Sensors forum

AWR1642BOOST: Eval boards for receiving CAN data on MCAN