AWR1642: What's the protocol when Eval board transmits data to PC by UART?

FrogLu

Part Number: AWR1642

I plan to build a GUI software by myself not supported by TI, and the software need to receive data and analysis the protocol directly from AWR1642BOOST ES1.0. So I need to know the protocol which way AWR1642BOOST ES1.0 transmits data in to PC by UART.

Who can tell me where to find the protocol or what's the protocol?

Best wishes

over 6 years ago

0 Anand Gadiyar over 6 years ago

TI__Genius 15005 points

Hi,

The data format is documented in the SDK documentation. It is available at the following location after installation:
C:\ti\mmwave_sdk_01_02_00_05\packages\ti\demo\xwr16xx\mmw\docs\doxygen\html\index.html

Please refer to the "Output information sent to the host" section in the documentation.

Best Regards,
Anand

0 FrogLu over 6 years ago in reply to Anand Gadiyar

Intellectual 320 points

Anand,
It's what I want to find,thank you.

Sensors

Sensors forum

AWR1642: What's the protocol when Eval board transmits data to PC by UART?