TDC1000-TDC7200EVM: TDC1000-TDC7200 EVM distance (water level of tank) is not accurate

ASHITOSH MAHAJAN

Prodigy 60 points

Part Number: TDC1000-TDC7200EVM

I have purchased and started study of TDC1000-TDC7200 EVM and GUI

but distance (water level of tank) is not accurate. as i increase level of water there is no change is GUI

please guide me.

and also give meaning of all parameter shown in GUI. so that I set this parameter

over 6 years ago

0 Bharat Aravamudhan over 6 years ago

TI__Genius 11015 points

Ashitosh,

Please refer to the guides below to work with this GUI:
1. www.ti.com/.../getliterature.tsp _ this document helps with the way to select and attach the transducer.
2. www.ti.com/.../snaa220a.pdf - This document provides a basic of the ultrasonic in level sensing & concentration.
3. The EVM users guide will help on how to setup the GUI and work through it
4. The TDC1000 & TDC7200 datasheet will help with the parameters in the GUI.

0 ASHITOSH MAHAJAN over 6 years ago in reply to Bharat Aravamudhan

Prodigy 60 points

i will study and check

thank you,

Bharat sir

Sensors

Sensors forum

TDC1000-TDC7200EVM: TDC1000-TDC7200 EVM distance (water level of tank) is not accurate