DCA1000+AWR1642

Annie Liu

Other Parts Discussed in Thread: MMWAVE-STUDIO, AWR1642, DCA1000EVM

Can DCA1000 acquisition card collect the source data of four AWR1642 receiving antennas after ADC?
If so, where is the data stored?
How to distinguish the data of the four antennas?

over 6 years ago

0 Jitendra Gupta over 6 years ago

TI__Guru 69960 points

Hi Annie,
DCA1000EVM can capture raw ADC from single AWR1642 for all the Rx antenna (4 Rx) and it stores that data to a single file adc_data.bin under mmWave-Studio installation 'mmWaveStudio\PostProc' directory.

Please refer these documents for raw ADC data format as device sends to DCA1000 (and it stores those as it is).
www.ti.com/.../swra581b.pdf
www.ti.com/.../swra555.pdf

On top of that here is the e2e page containing all important device link which might help you with any future queries.
e2e.ti.com/.../779813

Regards,
Jitendra

Sensors

Sensors forum

DCA1000+AWR1642