CCS/AWR1642BOOST: Getting the U13 and U12 temperature sensors readout over I2C protocol

Claudio ANUCHNIK

Expert 1100 points

Part Number: AWR1642BOOST

Tool/software: Code Composer Studio

Hi all,

Is there any demo project where U13 and U12 temperature sensors readout over I2C protocol is ready to use?

I just want to change the I2C address in order to use the driver for talking with other I2C device.

Thanks

Claudio

over 6 years ago

0 Cesar over 6 years ago

TI__Guru**** 150234 points

HI,

The mmWave SDK is supporting the AWR1642BOOST

I am not aware of any demo that uses i2C

thank you
cesar

0 aozer over 6 years ago

TI__Mastermind 30975 points

Hello Claudio,

As far as I am aware, we do not have any current projects that utilize the I2C interface. You can use the I2C driver provided in the the mmWave SDK to implement in your own code.

C:\ti\mmwave_sdk<version_number>\packages\ti\drivers\i2c

Regards,

Adrian

0 Claudio ANUCHNIK over 6 years ago in reply to aozer

Expert 1100 points

Hi all,

I will try to integrate the unit test for i2c driver found in the SDK

Thank you,

Claudio

Sensors

Sensors forum

CCS/AWR1642BOOST: Getting the U13 and U12 temperature sensors readout over I2C protocol