• State TI Thinks Resolved
  • Locked Locked
  • Replies 13 replies
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 2524 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1243: Issues with AWR1243+DCA1000

Phong Le
Prodigy 550 points
Part Number: AWR1243
Other Parts Discussed in Thread: AWR1443

Can you help with question below?

1.       Firstly, we use  AWR1243+DCA1000 running mmWave studio to capture data through network, the DCA1000 firmware version always show 0.0.0.0, and the Ethernet cannot be connected. So we cannot capture data.

We have changed 4 PC, including 2 win10, 2 win8 OS, that is the same result. And also we follow the video from official website, but it cannot solve the problem.

2.       Secondly, since the DCA1000 FPGA version shows 0.0.0.0, we try to update the firmware follow the user guide. But it erases successfully, but program fail.

 

Need help with 2 items below:

1.       Help us to upgrade the firmware to DCA1000, to make it work

2.       Help us to setup the AWR1243+DCA1000 data capture system.

 

  • 0
    TI__Guru*** 148304 points
    Hi

    I will contact our hw team to help you update the firmware.

    Thank you
    Cesar
  • 0 in reply to Cesar
    TI__Prodigy 550 points

    Thanks Cesar, this is time sensitive for the customer. Any input to help debug today would be great.

  • 0 in reply to Phong Le
    TI__Guru*** 148304 points
    Please review instructions to flash the firmware in the EVM UF Section 9

    www.ti.com/.../spruij4.pdf

    Thank you
    Cesar
  • 0
    TI__Prodigy 550 points
    Cesar,
     
    Is there a way to double confirm if the board is bricked (comment from the customer below)?
     

    2.       Secondly, since the DCA1000 FPGA version shows 0.0.0.0, we try to update the firmware follow the user guide. But it erases successfully, but program fail. That causes the board totally broken, cannot work now!!!!

     
     
     
  • 0
    TI__Prodigy 550 points
    Latest update:
     

    1.       Follow the step, we also have to press the SW4, so that the programing can be success. This looks our DCA1000 is ok now. It can be detected by device management. Thanks!

     

    2.       And now please continue to help us to solve the DCA1000+AWR1243 to capture data issue. Using mmWave studio, each time we click “setup DCA1000”, and configure, but the FPGA version always 0.0.0.0.

    We are using win10 64bit, and close all the firewall, followed the mmwave_sensor_raw_data_capture_using_dca1000_v02.pdf ,but not working. This issue blocked us so long times. Please help us to solve this issue.
     
     
     
     
  • 0 in reply to Phong Le
    TI__Mastermind 24955 points
    Phong,

    Can you upload a picture of your physical setup? Can you upload your mmWave Studio log files? Both of these will help debug this issue.

    Regards,
    Kyle
  • 0
    TI__Prodigy 550 points
    Kyle,
     
    Now let me summarize my questions:
    We have two solution, first is DCA1000+AWR1443, the second is DCA+AWR1243. Both solution have problems, and the problems are different!
    Now let me shows the question details.
    At beginning, I show my platform: Win10 64bit, mmwave_studio_01_00_00_00
     
    Part 1, First solution,  DCA1000+AWR1443: cannot get data, Ethernet is not work, and other strange problems
             Hardware configuration is like picture:
     
      My enabling steps,

    1.       Connect hardware, two power, two USB cable, one Ethernet.

    2.       Power on

    3.       Open mmWave Studio 1.0.0.0

    4.       RadarAPI screem -> choose DCA1000 check box (OK), -> Reset Set (OK) -> connect XDS110 Class Application/User UART with 115200 (OK) ->  load BSS FW xwr12xx_xwr14xx_radarss_ES2.0.bin (OK) -> load MSS FW xwr12xx_xwr14xx_masterss_ES2.0.bin (OK) -> SPI connect (FAIL)

    GM: Constructor

    GM: Wed Mar 27 17:52:58 2019

    RSTD.Transmit("/Settings")

    [17:52:59] 

    [17:52:59]  ### Running Startup script: "C:\ti\mmwave_studio_01_00_00_00\mmWaveStudio\Scripts\Startup.lua" ###

    [17:52:59]  RSTD.SetAndTransmit ("/Settings/Scripter/Display DateTime" , "1")

    [17:52:59]  RSTD.SetAndTransmit ("/Settings/Scripter/DateTime Format" , "HH:mm:ss")

    [17:52:59]  Scripter ignored: Attempt to UnBuild() again or before Build.

    [17:52:59]  RSTD.SetVar ("/Settings/Clients/Client 0/Dll" , "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Clients\\\\LabClient.dll")

    [17:52:59]  RSTD.SetVar ("/Settings/Clients/Client 0/Use" , "TRUE")

    [17:52:59]  RSTD.SetVar ("/Settings/Clients/Client 1/Use" , "FALSE")

    [17:52:59]  RSTD.SetVar ("/Settings/Clients/Client 2/Use" , "FALSE")

    [17:52:59]  RSTD.SetVar ("/Settings/Clients/Client 3/Use" , "FALSE")

    [17:52:59]  RSTD.SetVar ("/Settings/Clients/Client 4/Use" , "FALSE")

    [17:52:59]  RSTD.SetVar ("/Settings/AL Client/AL Dll" , "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\RunTime\\SAL.dll")

    [17:52:59]  RSTD.SetVar ("/Settings/Clients/Client 0/GuiDll" , "")

    [17:52:59]  RSTD.SetVar ("/Settings/AutoUpdate/Enabled" , "TRUE")

    [17:52:59]  RSTD.SetVar ("/Settings/AutoUpdate/Interval" , "1")

    [17:52:59]  RSTD.SetVar ("/Settings/Monitors/UpdateDisplay" , "TRUE")

    [17:52:59]  RSTD.SetVar ("/Settings/Monitors/OneClickStart" , "TRUE")

    [17:52:59]  RSTD.SetVar ("/Settings/Automation/Automation Mode" , "false")

    [17:52:59]  RSTD.Transmit("/")

    [17:52:59]  RSTD.SaveSettings(): Settings saved to "C:\Users\wliu29\AppData\Roaming\RSTD\config.xml"

    [17:52:59]  RSTD.Build()

    [17:52:59]  RSTD.SaveSettings(): Settings saved to "C:\Users\wliu29\AppData\Roaming\RSTD\config.xml"

    [17:52:59]  RSTD.Transmit("/")

    [17:52:59]  RSTD.AL_Build()

    [17:52:59]  RSTD.AL_LoadXml()

    [17:52:59]  RSTD.Transmit("/")

    [17:52:59]  RSTD.AL_Init()

    [17:52:59]  RSTD.Clients_Build()

    [17:52:59]  GM: Init

    [17:52:59]  GM: Loaded 'C:\ti\mmwave_studio_01_00_00_00\mmWaveStudio\Clients\\LabClient.dll'

    [17:52:59]  GM: 1 Guest (s) init

    [17:52:59]  GM: 1 Module(s) init

    [17:52:59]  GM: 2 Tab   (s) init

    [17:52:59]  RSTD.Client_LoadXml()

    [17:53:00]  [RadarAPI]: Starting Matlab Engine..

    [17:53:12]  [RadarAPI]: Matlab Engine Started!

    [17:53:16]  [RadarAPI]: ar1.LoadSettings('C:\Users\wliu29\AppData\Roaming\RSTD\ar1gui.ini')

    [17:53:17]  TESTING = false

    [17:53:17] 

    [17:53:17]  ***Script completed successfully.***

    [18:02:44]  [RadarAPI]: Opening Gpio Control Port()

    [18:02:44]  Status: Failed to open/close GpioControl, Error Type: PROTOCOL ERROR

    [18:02:45]  [RadarAPI]: Opening Board Control Port()

    [18:02:45]  [RadarAPI]: Status: Failed to open/close BoardControl, Error value: -1

    [18:02:46]  [RadarAPI]: ar1.FullReset()

    [18:02:46]  [RadarAPI]: Status: Failed To give full reset, Error Value: -7

    [18:02:46]  [RadarAPI]: ar1.SOPControl(2)

    [18:02:46]  [RadarAPI]: Status: Passed

    [18:03:36]  [RadarAPI]: ar1.Connect(6,115200,1000)

    [18:03:37]  [RadarAPI]: ar1.Calling_IsConnected()

    [18:03:38]  [RadarAPI]: ar1.SelectChipVersion("XWR1443")

    [18:03:38]  [RadarAPI]: Status: Passed

    [18:03:39]  [RadarAPI]: ar1.SelectChipVersion("XWR1443")

    [18:03:39]  [RadarAPI]: Status: Passed

    [18:03:40]  [RadarAPI]: ar1.SaveSettings('C:\Users\wliu29\AppData\Roaming\RSTD\ar1gui.ini')

    [18:05:00]  [RadarAPI]: ar1.DownloadBSSFw("C:\\ti\\mmwave_studio_01_00_00_00\\rf_eval_firmware\\radarss\\xwr12xx_xwr14xx_radarss_ES2.0.bin")

    [18:05:00]  [RadarAPI]: Downloading BSS ROM Legacy Binary..

    [18:06:18]  [RadarAPI]: ar1.DownloadMSSFw("C:\\ti\\mmwave_studio_01_00_00_00\\rf_eval_firmware\\masterss\\xwr12xx_xwr14xx_masterss_ES2.0.bin")

    [18:06:18]  [RadarAPI]: Downloading MSS Legacy Binary..

    [18:07:16]  [RadarAPI]: ar1.PowerOn(0, 1000, 0, 0)

    [18:07:16]  Status: Failed, Error Type: RESP TIMEOUT

    [18:07:16]  [RadarAPI]: ar1.SaveSettings('C:\Users\wliu29\AppData\Roaming\RSTD\ar1gui.ini')

    5.       Lua Shell -> Open a lua shell commands file -> AR1xInit.lua -> finished script->OK

    Close mmWave Studio 1.0.0.0, keeping power on

    Open mmWave Studio 1.0.0.0,

    (only use this method can connect SPI successfully, I don’t know why)

    6.       RadarAPI screem -> choose DCA1000 check box (OK), -> Reset Set (OK) -> connect XDS110 Class Application/User UART with 115200 (OK) ->  load BSS FW xwr12xx_xwr14xx_radarss_ES2.0.bin (OK) -> load MSS FW xwr12xx_xwr14xx_masterss_ES2.0.bin (OK) -> SPI connect (OK) -> RF Powered up

    7.       Static config -> set default ->set…..

    8.       Data config ->set default->set……

    9.       Sensor config-> sensor configuration set default -> chirp set default -> frame set - > Setup DAC1000 : connect, reset and configure (log shows: Ethernet Cable is disconnected Please check.....!!!)

    10.   DCA1000 ARM -> Trigger Frame -> PostProc -> adc_data.bin is 0 byte empty file. Cannot collect data.

    GM: Constructor

    GM: Wed Mar 27 18:11:23 2019

    RSTD.Transmit("/Settings")

    [18:11:23] 

    [18:11:23]  ### Running Startup script: "C:\ti\mmwave_studio_01_00_00_00\mmWaveStudio\Scripts\Startup.lua" ###

    [18:11:24]  RSTD.SetAndTransmit ("/Settings/Scripter/Display DateTime" , "1")

    [18:11:24]  RSTD.SetAndTransmit ("/Settings/Scripter/DateTime Format" , "HH:mm:ss")

    [18:11:24]  Scripter ignored: Attempt to UnBuild() again or before Build.

    [18:11:24]  RSTD.SetVar ("/Settings/Clients/Client 0/Dll" , "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Clients\\\\LabClient.dll")

    [18:11:24]  RSTD.SetVar ("/Settings/Clients/Client 0/Use" , "TRUE")

    [18:11:24]  RSTD.SetVar ("/Settings/Clients/Client 1/Use" , "FALSE")

    [18:11:24]  RSTD.SetVar ("/Settings/Clients/Client 2/Use" , "FALSE")

    [18:11:24]  RSTD.SetVar ("/Settings/Clients/Client 3/Use" , "FALSE")

    [18:11:24]  RSTD.SetVar ("/Settings/Clients/Client 4/Use" , "FALSE")

    [18:11:24]  RSTD.SetVar ("/Settings/AL Client/AL Dll" , "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\RunTime\\SAL.dll")

    [18:11:24]  RSTD.SetVar ("/Settings/Clients/Client 0/GuiDll" , "")

    [18:11:24]  RSTD.SetVar ("/Settings/AutoUpdate/Enabled" , "TRUE")

    [18:11:24]  RSTD.SetVar ("/Settings/AutoUpdate/Interval" , "1")

    [18:11:24]  RSTD.SetVar ("/Settings/Monitors/UpdateDisplay" , "TRUE")

    [18:11:24]  RSTD.SetVar ("/Settings/Monitors/OneClickStart" , "TRUE")

    [18:11:24]  RSTD.SetVar ("/Settings/Automation/Automation Mode" , "false")

    [18:11:24]  RSTD.Transmit("/")

    [18:11:24]  RSTD.SaveSettings(): Settings saved to "C:\Users\wliu29\AppData\Roaming\RSTD\config.xml"

    [18:11:24]  RSTD.Build()

    [18:11:24]  RSTD.SaveSettings(): Settings saved to "C:\Users\wliu29\AppData\Roaming\RSTD\config.xml"

    [18:11:24]  RSTD.Transmit("/")

    [18:11:24]  RSTD.AL_Build()

    [18:11:24]  RSTD.AL_LoadXml()

    [18:11:24]  RSTD.Transmit("/")

    [18:11:24]  RSTD.AL_Init()

    [18:11:24]  RSTD.Clients_Build()

    [18:11:24]  GM: Init

    [18:11:24]  GM: Loaded 'C:\ti\mmwave_studio_01_00_00_00\mmWaveStudio\Clients\\LabClient.dll'

    [18:11:24]  GM: 1 Guest (s) init

    [18:11:24]  GM: 1 Module(s) init

    [18:11:24]  GM: 2 Tab   (s) init

    [18:11:24]  RSTD.Client_LoadXml()

    [18:11:24]  [RadarAPI]: Starting Matlab Engine..

    [18:11:29]  [RadarAPI]: Matlab Engine Started!

    [18:11:32]  [RadarAPI]: ar1.LoadSettings('C:\Users\wliu29\AppData\Roaming\RSTD\ar1gui.ini')

    [18:11:32]  TESTING = false

    [18:11:32] 

    [18:11:32]  ***Script completed successfully.***

    [18:11:38]  [RadarAPI]: Opening Gpio Control Port()

    [18:11:38]  [RadarAPI]: Status: Passed

    [18:11:38]  [RadarAPI]: Opening Board Control Port()

    [18:11:38]  [RadarAPI]: Status: Passed

    [18:11:39]  [RadarAPI]: ar1.FullReset()

    [18:11:39]  [RadarAPI]: Status: Passed

    [18:11:40]  [RadarAPI]: Closing Board Control Port()

    [18:11:40]  [RadarAPI]: Status: Passed

    [18:11:40]  [RadarAPI]: Closing Gpio Control Port()

    [18:11:40]  [RadarAPI]: Status: Passed

    [18:11:40]  [RadarAPI]: ar1.SOPControl(2)

    [18:11:40]  [RadarAPI]: Status: Passed

    [18:11:45]  [RadarAPI]: ar1.Connect(6,115200,1000)

    [18:11:46]  [RadarAPI]: ar1.Calling_IsConnected()

    [18:11:47]  [RadarAPI]: ar1.SelectChipVersion("XWR1443")

    [18:11:47]  [RadarAPI]: Status: Passed

    [18:11:48]  [RadarAPI]: ar1.SelectChipVersion("XWR1443")

    [18:11:48]  [RadarAPI]: Status: Passed

    [18:11:48]  [RadarAPI]: ar1.SaveSettings('C:\Users\wliu29\AppData\Roaming\RSTD\ar1gui.ini')

    [18:11:50]  [RadarAPI]: ar1.DownloadBSSFw("C:\\ti\\mmwave_studio_01_00_00_00\\rf_eval_firmware\\radarss\\xwr12xx_xwr14xx_radarss_ES2.0.bin")

    [18:11:50]  [RadarAPI]: Downloading BSS ROM Legacy Binary..

    [18:13:00]  [RadarAPI]: ar1.DownloadMSSFw("C:\\ti\\mmwave_studio_01_00_00_00\\rf_eval_firmware\\masterss\\xwr12xx_xwr14xx_masterss_ES2.0.bin")

    [18:13:00]  [RadarAPI]: Downloading MSS Legacy Binary..

    [18:13:22]  [RadarAPI]: ar1.PowerOn(0, 1000, 0, 0)

    [18:13:22]  [RadarAPI]: Status: Passed

    [18:13:22]  MSS power up done async event received!

    [18:13:22]  [RadarAPI]: ar1.SaveSettings('C:\Users\wliu29\AppData\Roaming\RSTD\ar1gui.ini')

    [18:13:24]  [RadarAPI]: ar1.RfEnable()

    [18:13:24]  BSS power up done async event received!

    [18:13:24]  [RadarAPI]: Status: Passed

    [18:15:00]  [RadarAPI]: ar1.ChanNAdcConfig(1, 1, 0, 1, 1, 1, 1, 2, 2, 0)

    [18:15:00]  [RadarAPI]: Status: Passed

    [18:15:04]  [RadarAPI]: ar1.LPModConfig(0, 0)

    [18:15:04]  [RadarAPI]: Status: Passed

    [18:15:06]  [RadarAPI]: ar1.RfInit()

    [18:15:07]  Status: Failed, Error Type: RESP TIMEOUT

    [18:15:10]  [RadarAPI]: ar1.RfSetCalMonFreqTxPowLimitConfig(76, 76, 76, 81, 81, 81, 0, 0, 0)

    [18:15:13]  Status: Failed, Error Type: RESP TIMEOUT

    [18:15:44]  [RadarAPI]: ar1.DataPathConfig(513, 1216644097, 0)

    [18:15:47]  Status: Failed, Error Type: RESP TIMEOUT

    [18:15:49]  [RadarAPI]: ar1.LvdsClkConfig(1, 1)

    [18:15:52]  Status: Failed, Error Type: RESP TIMEOUT

    [18:15:56]  [RadarAPI]: ar1.LVDSLaneConfig(0, 1, 1, 1, 1, 1, 0, 0)

    [18:15:59]  Status: Failed, Error Type: RESP TIMEOUT

    [18:16:15]  [RadarAPI]: ar1.ProfileConfig(0, 77, 100, 6, 60, 0, 0, 0, 0, 0, 0, 29.982, 0, 256, 10000, 0, 0, 30)

    [18:16:18]  Status: Failed, Error Type: RESP TIMEOUT

    [18:16:35]  [RadarAPI]: ar1.ChirpConfig(0, 0, 0, 0, 0, 0, 0, 1, 0, 0)

    [18:16:38]  Status: Failed, Error Type: RESP TIMEOUT

    [18:16:59]  [RadarAPI]: ar1.DisableTestSource(0)

    [18:17:02]  Status: Failed, Error Type: RESP TIMEOUT

    [18:17:02]  [RadarAPI]: ar1.FrameConfig(0, 0, 8, 128, 40, 30, 1)

    [18:17:05]  Status: Failed, Error Type: RESP TIMEOUT

    [18:17:05]  [RadarAPI]: MatlabProc Status: Failed

    [18:17:11]  [RadarAPI]: ar1.SelectCaptureDevice("DCA1000")

    [18:17:11]  [RadarAPI]: passed

    [18:18:08]  [RadarAPI]: ar1.SelectCaptureDevice("DCA1000")

    [18:18:08]  [RadarAPI]: passed

    [18:18:10]  [RadarAPI]: StatusDCCard Event Registered

    [18:18:10]  [RadarAPI]: Status: Passed

    [18:18:10]  [RadarAPI]: ar1.CaptureCardConfig_EthInit("192.168.33.30", "192.168.33.180", "12:34:56:78:90:12", 4096, 4098)

    [18:18:12]  ConnectRFDCCard Status: RRFDCCARD_SUCCESS

    [18:18:12]  Ethernet Cable is disconnected Please check.....!!!

    [18:20:59]  [RadarAPI]: ar1.CaptureCardConfig_StartRecord("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\PostProc\\adc_data.bin", 1)

    [18:20:59]  [RadarAPI]: Status: Passed

    [18:22:17]  [RadarAPI]: ar1.SelectCaptureDevice("DCA1000")

    [18:22:17]  [RadarAPI]: passed

    [18:22:55]  [RadarAPI]: Packet Reorder Utility Started...please wait...

    [18:22:55]  [RadarAPI]: ar1.PacketReorderZeroFill("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\PostProc\\adc_data_Raw_0.bin", "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\PostProc\\adc_data.bin", "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\PostProc\\pktlogfile.txt")

    [18:23:00]  [RadarAPI]: Packet Reorder Utility process completed!

    [18:23:05]  [RadarAPI]: ar1.StartMatlabPostProc("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\PostProc\\adc_data.bin")

     
     
    Part 2, Second solution, DCA1000+AWR1243, COM ports becomes very strange, cannot connect the devices.
            

    1.       Connect hardware, two power, two USB cable, one Ethernet. Power on. Device management shows there are two same COM ports!!! COM9 and COM8 are multi-defined. This causes mmWave studio cannot work!!

    2.       Open mmWave studio 1.0.0.0

    RadarAPI screem -> choose DCA1000 check box , -> Reset Set -> connect XDS110 Class Application/User UART with 115200 (FALI) ->  load BSS FW xwr12xx_xwr14xx_radarss_ES2.0.bin (FALI) -> load MSS FW xwr12xx_xwr14xx_masterss_ES2.0.bin (FALI) -> SPI connect (FAIL)

            
                                GM: Constructor
    GM: Wed Mar 27 18:37:59 2019
    RSTD.Transmit("/Settings")
    [18:37:59] 
    [18:37:59]  ### Running Startup script: "C:\ti\mmwave_studio_01_00_00_00\mmWaveStudio\Scripts\Startup.lua" ###
    [18:37:59]  RSTD.SetAndTransmit ("/Settings/Scripter/Display DateTime" , "1")
    [18:37:59]  RSTD.SetAndTransmit ("/Settings/Scripter/DateTime Format" , "HH:mm:ss")
    [18:37:59]  Scripter ignored: Attempt to UnBuild() again or before Build.
    [18:37:59]  RSTD.SetVar ("/Settings/Clients/Client 0/Dll" , "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Clients\\\\LabClient.dll")
    [18:37:59]  RSTD.SetVar ("/Settings/Clients/Client 0/Use" , "TRUE")
    [18:37:59]  RSTD.SetVar ("/Settings/Clients/Client 1/Use" , "FALSE")
    [18:37:59]  RSTD.SetVar ("/Settings/Clients/Client 2/Use" , "FALSE")
    [18:37:59]  RSTD.SetVar ("/Settings/Clients/Client 3/Use" , "FALSE")
    [18:37:59]  RSTD.SetVar ("/Settings/Clients/Client 4/Use" , "FALSE")
    [18:37:59]  RSTD.SetVar ("/Settings/AL Client/AL Dll" , "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\RunTime\\SAL.dll")
    [18:37:59]  RSTD.SetVar ("/Settings/Clients/Client 0/GuiDll" , "")
    [18:37:59]  RSTD.SetVar ("/Settings/AutoUpdate/Enabled" , "TRUE")
    [18:37:59]  RSTD.SetVar ("/Settings/AutoUpdate/Interval" , "1")
    [18:37:59]  RSTD.SetVar ("/Settings/Monitors/UpdateDisplay" , "TRUE")
    [18:37:59]  RSTD.SetVar ("/Settings/Monitors/OneClickStart" , "TRUE")
    [18:37:59]  RSTD.SetVar ("/Settings/Automation/Automation Mode" , "false")
    [18:37:59]  RSTD.Transmit("/")
    [18:37:59]  RSTD.SaveSettings(): Settings saved to "C:\Users\wliu29\AppData\Roaming\RSTD\config.xml"
    [18:37:59]  RSTD.Build()
    [18:37:59]  RSTD.SaveSettings(): Settings saved to "C:\Users\wliu29\AppData\Roaming\RSTD\config.xml"
    [18:37:59]  RSTD.Transmit("/")
    [18:37:59]  RSTD.AL_Build()
    [18:37:59]  RSTD.AL_LoadXml()
    [18:37:59]  RSTD.Transmit("/")
    [18:37:59]  RSTD.AL_Init()
    [18:37:59]  RSTD.Clients_Build()
    [18:37:59]  GM: Init
    [18:37:59]  GM: Loaded 'C:\ti\mmwave_studio_01_00_00_00\mmWaveStudio\Clients\\LabClient.dll'
    [18:37:59]  GM: 1 Guest (s) init
    [18:37:59]  GM: 1 Module(s) init
    [18:37:59]  GM: 2 Tab   (s) init
    [18:37:59]  RSTD.Client_LoadXml()
    [18:38:00]  [RadarAPI]: Starting Matlab Engine..
    [18:38:04]  [RadarAPI]: Matlab Engine Started!
    [18:38:08]  [RadarAPI]: ar1.LoadSettings('C:\Users\wliu29\AppData\Roaming\RSTD\ar1gui.ini')
    [18:38:09]  TESTING = false
    [18:38:09] 
    [18:38:09]  ***Script completed successfully.***
    [18:38:26]  [RadarAPI]: Opening Gpio Control Port()
    [18:38:26]  [RadarAPI]: Status: Passed
    [18:38:27]  [RadarAPI]: Opening Board Control Port()
    [18:38:27]  [RadarAPI]: Status: Passed
    [18:38:28]  [RadarAPI]: ar1.FullReset()
    [18:38:28]  [RadarAPI]: Status: Passed
    [18:38:29]  [RadarAPI]: Closing Board Control Port()
    [18:38:29]  [RadarAPI]: Status: Passed
    [18:38:29]  [RadarAPI]: Closing Gpio Control Port()
    [18:38:29]  [RadarAPI]: Status: Passed
    [18:38:29]  [RadarAPI]: ar1.SOPControl(2)
    [18:38:29]  [RadarAPI]: Status: Passed
    [18:38:36]  [RadarAPI]: ar1.Connect(9,115200,1000)
    [18:38:38]  [RadarAPI]: Error: Connection failed: Calling_ConnectTarget returned 3
    [18:38:38]  [RadarAPI]: ar1.Calling_IsConnected()
    [18:38:38]  [RadarAPI]: ar1.SaveSettings('C:\Users\wliu29\AppData\Roaming\RSTD\ar1gui.ini')
    [18:38:41]  [RadarAPI]: ar1.DownloadBSSFw("C:\\ti\\mmwave_studio_01_00_00_00\\rf_eval_firmware\\radarss\\xwr12xx_xwr14xx_radarss_ES2.0.bin")
    [18:38:41]  [RadarAPI]: Error: Download FW failed with error -1
    [18:38:42]  [RadarAPI]: ar1.DownloadMSSFw("C:\\ti\\mmwave_studio_01_00_00_00\\rf_eval_firmware\\masterss\\xwr12xx_xwr14xx_masterss_ES2.0.bin")
    [18:38:42]  [RadarAPI]: Error: Download FW failed with error -1
    [18:38:43]  [RadarAPI]: ar1.PowerOn(0, 1000, 0, 0)
    [18:38:43]  Status: Failed, Error Type: RADAR INTERFACE ERROR
    [18:38:43]  [RadarAPI]: ar1.SaveSettings('C:\Users\wliu29\AppData\Roaming\RSTD\ar1gui.ini')
     
     
     
     
  • 0 in reply to Phong Le
    TI__Prodigy 550 points

    Can I get some input on this today?

  • 0 in reply to Phong Le
    TI__Mastermind 24955 points
    Phong,

    Did you make sure to change the IP address on your PC so that is has a hard-coded address of 192.168.33.30?

    Regards,
    Kyle
  • 0
    TI__Prodigy 550 points
    Yes, I am sure that the IP address on my PC has been changed to 192.168.33.30. But awr1443+DCA1000 did not work as before. Is there any other things that I missed?
    We are going to use this radars to collect data. This has been blocked for a while need to close those aspa.
     
     
     
     
     
     
     
     
     
  • 0 in reply to Phong Le
    TI__Mastermind 24955 points
    Phong,

    Can you upload screenshots of the Window Device Manager for the two configurations you are attempting? It is not immediately clear what the issue is with the COM ports.

    Regards,
    Kyle
  • 0
    TI__Prodigy 550 points
     
    Solution 1: AWR1443+DCA1000, the com ports are looks correct
     
    Solution 2: AWR1243+DCA1000, the COM ports are not correct, since COM8 and COM9 are double defined.
     
    Currently, can you side firstly help me to solve the Ethernet issue about solution 1? At least we can collect data firstly, and then you help me to solve the solution2 COM ports issue.
     
     
     
    Should we schedule a call? At this point this is just frustrating the customer.
     
  • 0 in reply to Phong Le
    TI__Mastermind 24955 points
    This issue is being addressed offline and should be considered closed at this point. Please create a new thread any new issues arise.