• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 294 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1642BOOST: AWR1642BOOST: Setting acquisiton paramaters and reading raw data

Nicolas Etaix
Prodigy 10 points
Part Number: AWR1642BOOST

Hello

I have an AWR1642BOOST development kit and I would like to be able to control it with a custom software. I am thinking about using either Python or Matlab. Ideally I would like to be able to set acquisition parameters and read raw data from the radar. I cannot find any example of this. I found some suggestion about using additionnal kit such as the DCA1000 or the TSW1400, but I would like to be sure it will allow me to do what I want before buying any new kit. Has anyone tried something similar or does anyone know where I could find some tutorial or programmer documentation to understand how to communicate with the radar?

Best regards

  • 0
    TI__Guru*** 148304 points
    Hi,

    "I would like to be able to set acquisition parameters and read raw data from the radar."

    If you are trying to capture raw data on a PC for multiple frames, this can only be achieved with DCA1000 or the TSW1400 using mmWave Studio to set the acquisition parameters

    thank you
    Cesar