RTOS/AWR1243BOOST: Connection between AWR1243 with TDA2x.

vasantha kumar raju angappan

Intellectual 370 points

Part Number: AWR1243BOOST
Other Parts Discussed in Thread: AWR1243

Tool/software: TI-RTOS

Hi,

I want to connect AWR1243 EVM boost board with TDA2x for RADAR signal processing.

Can you please let me know, how to directly connect these two EVMs?

Thanks,

Vasanth

over 6 years ago

0 Cesar over 6 years ago

TI__Guru*** 148334 points

Hi,

The AWR1243 MMIC needs to connect to the TDA device for

1) SPI control communication
2) CSI-2 communication
3) HPINT (Host Port Interrupt)

Are you planning to build your own board?

Thank you
Cesar

0 vasantha kumar raju angappan over 6 years ago in reply to Cesar

Intellectual 370 points

Hi,

No, I am not planning to build my own board.

I want to connect the AWR1243 with TDA2x for the processing of RADAR data at TDA2x.
The RADAR data needs to be passed from AWR1243 to TDA2x.

I want to know how to connect these two boards, so that I can receive the RADAR data at TDA2x.

Thanks,
Vasanth

0 Anand Gadiyar over 6 years ago in reply to vasantha kumar raju angappan

TI__Genius 15005 points

Hi,

We don't support directly connecting these two boards.

You will need to make your own adapter board, or custom TDA2x board to interface with the EVM.

Best Regards,
Anand

Sensors

Sensors forum

RTOS/AWR1243BOOST: Connection between AWR1243 with TDA2x.