• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 278 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR1443: IWR1443

Victor Tapia Osornio
Prodigy 240 points
Part Number: IWR1443

Hello

I would like to know about the 2000ma consume in the terminal VIN_13RF1 and VIN_13RF does this cosume is just while it does the lecture or is it all the time the sensor is on ?

Cheers

  • 0
    TI__Guru*** 148804 points
    Hi,

    Higher power consumption is only during the RF signal (chirping)

    I have contacted the hw team for more details

    thank you
    Cesar
  • 0
    TI__Mastermind 25835 points
    Hello,

    The 2000 mA current consumption in the terminal VIN_13RF1 and VIN_13RF is only during the active region of Chirping.
    During non-RF active regions such as long idle time during inter frame periods or long inter chirp duration (If Idle time >10us) then in those time intervals it would not be consuming current.

    Thanks and regards,
    CHETHAN KUMAR Y.B.