CCS/IWR1642BOOST: IWR1642BOOST ADC and DAC raw data acquisition

HAIGANG ZHAO

Part Number: IWR1642BOOST
Other Parts Discussed in Thread: IWR1642

Tool/software: Code Composer Studio

TI's engineers, this is the block diagram of the IWR1642BOOST DEMO board. How do you get the ADC data in this picture? Which array or address is this ADC data stored in? I want to print out the data through the serial port. How do I do this? thank you very much.

over 6 years ago

0 Chloe Shay71 over 6 years ago

TI__Expert 4025 points

Hello,

We recommend using the DCA1000 for raw data capture.

- Chloe

0 HAIGANG ZHAO over 6 years ago in reply to Chloe Shay71

Intellectual 780 points

Thank you very much, I know this DCA1000, but this solution is not very convenient for us to use. We want to know where the ADC data is stored (stored in an array or an address?), I directly find this array Then print it out with the serial port. What should I do? Thank you

0 Chloe Shay71 over 6 years ago in reply to HAIGANG ZHAO

TI__Expert 4025 points

Hello,

You can find the schematic for the IWR1642 Boost here.

Hope this helps.

-Chloe

0 HAIGANG ZHAO over 6 years ago in reply to Chloe Shay71

Intellectual 780 points

Thank you very much, but I want to modify the program to get the data of the ADC I want, I don't know how to modify it.

0 Chloe Shay71 over 6 years ago in reply to HAIGANG ZHAO

TI__Expert 4025 points

Hello,

We only support the DCA1000 raw data capture solution.

- Chloe

Sensors

Sensors forum

CCS/IWR1642BOOST: IWR1642BOOST ADC and DAC raw data acquisition