AWR1443BOOST: AWR1443BOOST MATLAB Demo

Gabriel Virbila

Prodigy 240 points

Part Number: AWR1443BOOST
Other Parts Discussed in Thread: MMWAVE-STUDIO, DCA1000EVM, AWR1443

I am looking for a Matlab demo for the AWR1443BOOST?

Thanks,

Gabriel

over 6 years ago

0 Jitendra Gupta over 6 years ago

TI__Guru 69960 points

Hi,
Could you elaborate more about what specific purpose you need this matlab script/demo for?

Regards,
Jitendra

0 Gabriel Virbila over 6 years ago in reply to Jitendra Gupta

Prodigy 240 points

Hi Jitendra,

We are looking to just capture the data in Matlab. Either the raw data or after performing a FFT.

Gabriel

0 Jitendra Gupta over 6 years ago in reply to Gabriel Virbila

TI__Guru 69960 points

Hi Gariel,
Using DCA1000EVM connecting to AWR1443 EVM you can capture the raw data. For this you need to use mmWave-Studio (PC based tool) which configure the device and initiate the capture event. Finally streamed raw data from AWR1443 will be captured and stored in the PC.
mmWave-Studio can be controlled using Matlab.
Please refer the user guide available in the mmWave-Studio installation for capture data file format and step to configure/capture.

Refer this thread discussing the similar query and you can search this forum for more related info
e2e.ti.com/.../791823

Regards,
Jitendra

Sensors

Sensors forum

AWR1443BOOST: AWR1443BOOST MATLAB Demo