AWR1642BOOST: DCA1000EVM - mmWave studio Micro doppler

Ruth Murape

Part Number: AWR1642BOOST

Hi,

I am now considering purchasing the DCA1000 EVM for my micro-Doppler experiments.

Can someone share with me an image of the results of the Micro-doppler tab (encircled in red) - see attached figure below:

I want to see the output from this tab before I make the purchase.

Regards,

over 6 years ago

0 Vivek Dham over 6 years ago

TI__Guru 58035 points

Hello Ruth,
The DCA1000 just captures the raw ADC data which you can then post process on the PC. The mmwave studio does provide some post processing examples. The micro-Doppler part of the post processing has not fully tested, but you can develop your own post processing on the ADC raw data captured from the DCA1000. The two are not coupled together.

Regards,
Vivek

0 Ruth Murape over 6 years ago in reply to Vivek Dham

Prodigy 60 points

Thanks a lot Vivek.
What is the difference between Radar studio and mmwave studio anyway?

0 Vivek Dham over 6 years ago in reply to Ruth Murape

TI__Guru 58035 points

Hello Ruth,
None, they are the same :-). Radar studio was the name used previously, now its called mmwave studio.

Regards,
Vivek

Sensors

Sensors forum

AWR1642BOOST: DCA1000EVM - mmWave studio Micro doppler