CCS: How does iwr1442 bypass the xds110 burning program?

user6003779

Tool/software: Code Composer Studio

Can Iwr1442 write the program to flash when bypassing xds110 during the heart rate test? In addition, how to connect the connections marked as DNP in J5 in iwr1442 .

Tank for your time.

over 6 years ago

0 Charles Oladimeji over 6 years ago

TI__Mastermind 33805 points

Hi,

Please see example in the SDK. Link below
...\packages\ti\drivers\qspi\test\main.c

Regards,
Charles o

0 user6003779 over 6 years ago in reply to Charles Oladimeji

Prodigy 20 points

HI，
I have looked at the main.c file, but it doesn't describe how to connect the wire marked with DNP. I want to know how to connect the wires marked DNP on the development board.
thanks for you time!

0 Charles Oladimeji over 6 years ago in reply to user6003779

TI__Mastermind 33805 points

DNP means " Do Not Populated".
You need to download the schematic and layout files, locate the position of the resistor footprints in on the board then solder the zero ohms resistors.

Regards,
Charles O

Sensors

Sensors forum

CCS: How does iwr1442 bypass the xds110 burning program?