This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1243BOOST: AWR1243BOOST+mmWave DevPack+TSW1400 EVM,I couldn't use these get any data.

Part Number: AWR1243BOOST

Dear TI Support, 

I am trying to use AWR1243BOOST+mmWave DevPack+TSW1400 EVM to get raw ADC data.I followed  all the instructions mentioned  in the video : training.ti.com/mmwave-sensor-raw-data-capture-using-tsw1400-board.But when I clicked TSW1400 ARM and waited for HSDC Pro to have completed the command , it gave me error,then I clicked Trigger Frame ,I got 0KB data.  

Error Log is pasted below:

[21:33:28] [RadarAPI]: TSW1400 set-up complete.
[21:33:40] [RadarAPI]: ar1.StartTsw1400Arm("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\PostProc\\adc_data.bin")
[21:33:51] [RadarAPI]: MatlabProc Status: Error Number: 1024
[21:33:51] [RadarAPI]: MatlabProc Status: Error Type:
[21:33:51] [RadarAPI]: TSW1400 capture complete
[21:33:52] [RadarAPI]: ar1.StartFrame()
[21:33:52] [RadarAPI]: Status: Passed
[21:33:52] Frame start async event received!
[21:33:52] [RadarAPI]: Frame Ended

So, Can you please guide me to what could be the problem here?