Hello
I would like to know which pins do I need to programm the IWR1443 and I dont mean the boostpack
Cheers
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello
I would like to know which pins do I need to programm the IWR1443 and I dont mean the boostpack
Cheers
Hi,
You need UART RX, UART TX, SOP0, SOP1, SOP2 and NRST to flash the board. JTAG pins are required for debug.
Please review the boosterpack schematic for better understanding
Regards,
Charles O