• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 229 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1642BOOST: AWR1642BOOST

Mikko Oijala
Prodigy 100 points
Part Number: AWR1642BOOST

The mmwave people counting lab uses a MATLAB program to read tracking data from the chip;

Is there an easy way to read the raw unprocessed radar data (no tracking) into a MATLAB program ??

  • 0
    TI__Mastermind 28055 points

    Hi Mikko,

    For raw point cloud, you can read the fHist after capturing.  Press the exit button at the bottom of the visualizer to save the FHist.  You can also see the user's guide (very bottom) to see the raw data format from the device.

    If you want Raw ADC data, please see the DCA1000.

    Regards,

    Justin