CCS/AWR1642BOOST: How to output ADC raw data with UART

HAIGANG ZHAO

Part Number: AWR1642BOOST
Other Parts Discussed in Thread: IWR1642BOOST

Tool/software: Code Composer Studio

Hi, TI engineers. I've seen a lot of engineers ask IWR1642BOOST how to use UART to output raw ADC data.And this question has been bothering me.There are many posts on the Internet discussing this issue, but without a complete and correct solution, can you provide an open source solution?thank you.

over 6 years ago

0 Jitendra Gupta over 6 years ago

TI__Guru 69970 points

Hi,
I am afraid that there is no exact example to send raw ADC data over UART but that can be done by amending the source code of the exisiting application.
Please refer these links-
e2e.ti.com/.../2803488
e2e.ti.com/.../759979

Regards,
Jitendra

0 HAIGANG ZHAO over 6 years ago in reply to Jitendra Gupta

Intellectual 780 points

Hello, thank you for your reply, I tried to follow the method above for the link you gave, but it did not succeed. Can you provide a modified DEMO or a specific program, thank you

0 Cesar over 6 years ago in reply to HAIGANG ZHAO

TI__Guru*** 149084 points

Hi,

Unfortunately we don't have a full demo to capture raw data using UART.

Let's see if other members of the forum community would have such a demo

thank you
Cesar

Sensors

Sensors forum

CCS/AWR1642BOOST: How to output ADC raw data with UART