PGA411Q1EVM: PGA411Q1EVM

Palani M

Part Number: PGA411Q1EVM

Hello, Clancy soehren,

Now, my PGA411Q1EVM not connecting to the system.. The Green LED Blinks even after pressing the push button...I tried several times and as soon as it connected to USB it starts blinking..

After pressing the push button also it blinks continuously..After opening the PGA41X application, it shows "Not Connected" and Firmware -- is blank... Please help..

Regards,

M.PALANI

over 5 years ago

0 Palani M over 5 years ago

Prodigy 165 points

Hello, I checked the control panel for usb connection.. It is not showing this device as it was showing earlier...

0 Clancy Soehren over 5 years ago

TI__Mastermind 23810 points

Palani,

It might take a few tries pushing the button before the green LED stops blinking (wait a few seconds after each attempt to give it a chance to stop blinking). As soon as you see a solid LED, you must open the GUI. If you wait too long, it will start blinking again.

Sensors

Sensors forum

PGA411Q1EVM: PGA411Q1EVM