CCS/IWR1443: Build error - High Accuracy Range Measurement – 14xx

Richard Lazar

Part Number: IWR1443
Other Parts Discussed in Thread: MMWAVE-SDK

Tool/software: Code Composer Studio

Hi Engineers!

I'm trying Rebuild the High Accuracy Range Measurement - 14xx Project, but i'm having a problem.
I'm followed the Steps for Building from the Source Code and Run.
Could anyone help me of this problem?

Best regards,
Richard

over 6 years ago

0 Akash Gondalia over 6 years ago

TI__Guru 50240 points

Hi Richard,

It is difficult to tell what your build error is, can you provide more information?

The High Accuracy Lab uses the mmWave-SDK 1.2, software-dl.ti.com/.../index_FDS.html

Cheers,
Akash

0 Richard Lazar over 6 years ago in reply to Akash Gondalia

Prodigy 80 points

Hi Akash,

I was directly download the High Accuracy Range Measurement project off the CCS.
i'm not modified the project, just start a rebuild, but i found a error.

0 Akash Gondalia over 6 years ago in reply to Richard Lazar

TI__Guru 50240 points

Hi Richard,

It appears you may have an incorrect version of the mmWave-SDK installed, you'll need version 1.2 for the High Accuracy Lab which is available here: software-dl.ti.com/.../index_FDS.html

Once you have installed this version I'd recommend clearing your project workspace and re-importing the project or even just starting a new workspace completely.

Cheers,
Akash

Sensors

Sensors forum

CCS/IWR1443: Build error - High Accuracy Range Measurement – 14xx