AWR1642BOOST: It can't work normally!

user5907403

Part Number: AWR1642BOOST

My AWR1642BOOST board can't work normally after my holiday ends, When I power it ，The 5V power indicator light is weak or even not bright，Other lights are not illuminated. I checked the positive and negative poles of the board with a multimeter and found that the board symptoms were short-circuited. But I don't know why this happened.I am operating according to the rules！

over 6 years ago

0 Cesar over 6 years ago

TI__Guru*** 149204 points

Hi,

Unfortunately there is not much help we can provided in this situation

thank you
Cesar

0 user5907403 over 6 years ago in reply to Cesar

Intellectual 370 points

Hello:

I also want to explain the details to you， But I don't know how to explain, I don't know what happened.

It can still work normally in the first second, and suddenly there is a problem. I don’t know the hardware. I don’t

know how to explain it. and I checked, it is not a problem with the power supply.

I just a student, This board is used for graduation design. There is not much time left, but you have never dealt with me.

I want to apply sales after ,I just want to get your reply: repair or change？

All my operations are in accordance with the instructions, I don't know why the board is bad, I think this is not caused by myself！

Looking forward to your reply！

0 Cesar over 6 years ago in reply to user5907403

TI__Guru*** 149204 points

Hi,

Unfortunately there is no additional technical support we can provide for this case.

Since you are a student, it is possible to contact the university program through the customer support center

https://ticsc.service-now.com/csm/

I will close this thread now

thank you

cesar

Sensors

Sensors forum

AWR1642BOOST: It can't work normally!