IWR1443BOOST: Runtime capture raw data with IWR1443BOOST and DCA1000

Zhan Xiang

Part Number: IWR1443BOOST
Other Parts Discussed in Thread: IWR1443,

Hi Champions,

I want to capture the raw data on IWR1443 with DCA1000 for run-time processing, not store the data to the file, is it feasible? I want to use mmwave studio to configure the IWR1443BOOST, and receive the raw data from UDP. Can you provide an example?

Zhan.

over 6 years ago

0 Chloe Shay71 over 6 years ago

TI__Expert 4025 points

Hi Zhan,

Real time streaming is not currently supported on the DCA1000.

Please see this thread for more info:

https://e2e.ti.com/support/sensors/f/1023/t/774514?tisearch=e2e-sitesearch&keymatch=dca1000%20udp

-Chloe

0 Zhan Xiang over 6 years ago in reply to Chloe Shay71

Prodigy 20 points

Hi Chloe,

I checked the above thread, it seems the host program use the DCA1000 dll to receive the raw data. So I can use 3rd party snoop tools to receive the UDP packet before sending to the mmwave studio?

Zhan.

0 Chloe Shay71 over 6 years ago in reply to Zhan Xiang

TI__Expert 4025 points

Hi Zhan,

You can look into this as a solution, but our only supported solution is using the DCA1000 for data capture to a file.

-Chloe

Sensors

Sensors forum

IWR1443BOOST: Runtime capture raw data with IWR1443BOOST and DCA1000