• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 650 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR6843: Exception: main.c, line 981.

Mark Elo
Prodigy 20 points
Part Number: IWR6843
Other Parts Discussed in Thread: MMWAVEICBOOST,

Out of the box, when I send config to device (IWR6843 + mmwaveicboost) from mmWave Demo SW I get;

.....

mmwDemo:/>sensorStart
Debug: Init Calibration Status = 0x1e

Exception: main.c, line 981.

Thanks

  • 0
    TI__Mastermind 30405 points

    Hi Mark,

    Are you running the Out of Box demo software using the mmWaveDemoVisualizer or do you have one of the other mmWave demos flashed on your EVM? 

    1. Please ensure that you have the EVM setup in standalone mode using the physical setup settings provided on this page.

    http://dev.ti.com/tirex/explore/node?node=AHX7NeXS2R2wfW9QXsKHvg__VLyFKFf__LATEST 

    2. Please reboot the board in functional mode using the settings described above and connect a terminal program (e.g. teraterm) to the XDS110 Class Application/User UART port using the following settings. Then type the version command (do not connect the mmWaveDemoVisualizer):

    mmWave COM ports shown in Windows Device Manager

    TeraTerm settings

    Version command output

    Thanks

    -Nitin

  • 0 in reply to Nitin Sakhuja
    Prodigy 20 points

    Hi - USB was very intermittent, i got Terra term functional, and eventually after lots of power cycling, plunging in and out the USB cable I managed re-flashed the board with the latest rev - it now works fine.

    This is issue is now closed - thanks