IWR1443BOOST: mmwave Demo Visulizer

Jason Jantzi

Part Number: IWR1443BOOST
Other Parts Discussed in Thread: IWR1443

Hi,

I'm trying to evaluate the IWR1443 boost. I have been using mmwave Demo Visualizer version 3.1.0

I am able to connection to the 2 serial ports sucessfully. I am able to send config to mmwave device and see the console messages. However, I don't see anything in the plots tab. I'm not sure what I am missing.

What do I need to do to see the x-y scatter plots?

Thanks,
Jason

over 6 years ago

0 Akash Gondalia over 6 years ago

TI__Guru 50240 points

Hi Jason,

Can you confirm what SDK version you are using? Are you sure the console is not throwing an error?

We recommend using the Visualizer version 3.2, have you tried this version?

Cheers,

Akash

0 Jason Jantzi over 6 years ago

Prodigy 130 points

Hi Akash,

I have tried version 3.2 with the same outcome.

The SDK that I am using is mmwave_sdk_02_01_00_04.

Thanks,
Jason

0 Jason Jantzi over 6 years ago

Prodigy 130 points

HI Akash,

Mmwave visualizer 3.2 doesn’t have the IWR1443 dropdown under “setup details – platform”. Only xWR16xx, xWR18xx, xWR64xx and xWR68xx.

Thanks,
Jason

0 Akash Gondalia over 6 years ago in reply to Jason Jantzi

TI__Guru 50240 points

Hi Jason,

Thank you for pointing this out, I had pointed you in the wrong direction. For IWR1443 you will want to use the Visualizer version 2.1.

Cheers,

Akash

Sensors

Sensors forum

IWR1443BOOST: mmwave Demo Visulizer