IWR1642: Case material and production line programmer

ALEX FINE

Prodigy 30 points

Part Number: IWR1642

Hi,

I hawe two questions about IWR1642 production:

1) What material recomende to use for case of this radar ? And where i can found it?

2) What production programmers for this part i can use for production line ?

Thank you.

over 6 years ago

0 Charles Oladimeji over 6 years ago

TI__Mastermind 33805 points

ALEX FINE said:
1) What material recomende to use for case of this radar ? And where i can found it?

Please see linked document section 5

http://www.ti.com/lit/an/spracg5/spracg5.pdf

ALEX FINE said:
What production programmers for this part i can use for production line ?

We don't recommend any programmer in particular. The EVM comes with the XDS110 debugger.

Regards,

Charles O

0 ALEX FINE over 6 years ago in reply to Charles Oladimeji

Prodigy 30 points

Hi,

"We don't recommend any programmer in particular. The EVM comes with the XDS110 debugger" - when we start the mass production, how i download the program to the chip?!

Thanks

0 Charles Oladimeji over 6 years ago in reply to ALEX FINE

TI__Mastermind 33805 points

Hi,

The assembly house usually has an idea how to do this.

Regards,

Charles O

0 ALEX FINE over 6 years ago in reply to Charles Oladimeji

Prodigy 30 points

We are the assembly house.. And for all kinds of chips exist ICP programmers, GANG programers etc. for production . So my qustion what programmer support this chip?!

0 Charles Oladimeji over 6 years ago in reply to ALEX FINE

TI__Mastermind 33805 points

Hi,

You will be flashing the SFLASH, you can use XDS110.

http://www.ti.com/tool/TMDSEMU110-U

Regards,

Charles O

Sensors

Sensors forum

IWR1642: Case material and production line programmer