• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 681 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RAW data extraction in DCA1000

zeyad a
Prodigy 30 points

Hello,

I am trying to extract raw data in real time (by setting the number of frames to 0) from the DCA1000. I also looked over the data sheet and found different arrangements for the byte extracted by the DCA1000. I am confused and do not know how to break down to packets to the sub-bytes like byte count, raw data, and sequence number. Any help would be appreciated. 

  • 0
    TI__Guru*** 149154 points

    Hi,

    The DCA1000 capture system requires capturing a finite number of frames. The captured data must be post processed with the utility provided in order to remove headers used during the capture process.

    Please see detailed description in the mmwave studio UG

    C:\ti\mmwave_studio_02_00_00_02\docs\mmwave_studio_user_guide.pdf

    Thank you

    Cesar